Ricoh 551, 700 manual Erase, Center/Border, 172

Copying

Erase

This function erases the center and/or all four sides of the original image. This is useful for avoiding shadows on the copy image caused by the bound originals, such as books.

This function can be used in three ways:

2 ❖ Border

This mode erases the edge margin of the original image.

❖Center

This mode erases the center margin of the original image.

❖Center/Border

This mode erases both the center and edge margins of the original image.

Note

❒You can change the width of the erased margin as follows:

Metric version	3 – 50mm (in 1mm steps)
Inch version	0.1" – 2.0" (in 0.1" steps)

❒The default setting of the erased margin is as follows. You can change this set- tings with the User Tools. See “Erase Border” and “Erase Center” in ⇒ P.317 “Page Format 1/2”.

Metric version	10mm
Inch version	0.4"

❒The width of the erased margin varies depending on the reproduction ratio.

❒If the size of the original is different from sizes listed in the following chart, the erased margin might be shifted.

❖ Metric version

Where Original Is Set	Paper Size and Orientation
Exposure glass	L	L	, A4	KL	KL	, 8	1	/2"	×	13"	L *1
	A3 , B4				, B5
Document feeder	A3L, B4L, A4KL, B5KL, A5KL, B6KL,
	11" × 17"L, 11" × 15"L, 82/1" × 11"KL, 81/2" ×
	13"L *1

*1 You can select from 81/2" × 13", 81/4" × 13" and 8" × 13" with the User Tools (Sys- tem Settings). See “<F/F4>Size Setting” in the System Settings manual.

172