Ricoh 700 When copying onto non-standard size paper, Press the # key, Press the Non Standard key

Copying from the Bypass Tray

❒Swing out the extender to support paper sizes larger than A4L, 81/2" × 11"L.

❒Fan paper to get air between the sheets and avoid a multi-sheet feed.

❒Before setting, adjust the paper if curled or warped.

When copying onto non-standard size paper

Important 2

❒You should specify the size of copy paper to avoid paper misfeeds.

APress the {#} key.

BPress the [Non Standard] key.

CPress the [Vert inch] key and enter the vertical size of the paper with the number keys, then press the [#] key.

Note

❒To change the number entered, press the [Clear] or {Clear/Stop}key and enter the new number.

DEnter the horizontal size of the paper with the number keys, then press the [#] key.

Note

❒If the [Horz inch] key is not highlighted, press the [Horz inch] key.

❒To change the number entered, press the [Clear] or {Clear/Stop}key and enter the new number.

ETo register the non-standard size entered, press the [Store] key and then press the [Cancel] key.

75