Settings You Can Change with the User Tools

Count Manager

When a key operator code has already been entered, you cannot begin manager settings unless you enter the key operator code (up to 8 digits).

Menu

Description

 

 

Check/Reset/Print Copy Counter

You can check or print the number of copies made under each user code. You can also reset each user code's counter to 0.

If more than 10 user codes are registered, you can view all the counters using the [UP- rev.] or [TNext] key.

Print

You can print the copied quantity of the counter for each

 

user code.

 

To start the printing, press the {Start}key.

 

To stop the printing, press the [Cancel] key.

 

 

Reset Counter

You can reset each user code's counter to 0.

 

 

Reset All

You can reset all counters to 0.

 

 

User Code Register/Change/Delete

You can register, change, or delete the user codes (8 digits or less).

Note

Up to 500 user codes can be registered.

Even if you have changed the user code, the counter value will not be cleared.

When the user code is deleted, the counter value will be automatically deleted.

Register

You can register the user codes.

 

 

Change

You can change the user codes.

 

Note

 

The number of copies made under the old code is added

 

to that made under the new user code.

 

 

Delete User Code

You can delete the user codes.

 

 

Delete All User Codes

You can delete all the user codes.

 

 

6

331

Page 347
Image 347
Ricoh 700, 551 manual Count Manager, 331