Copying

BSet the original face down on the exposure glass. The original should be aligned to the rear left corner.

1

2

2

ND1C01EE

1:Reference mark

2:Scale

Note

Start with the first page to be copied.

CLower the document feeder.

Setting Originals in the Document Feeder

Note

The last page should be on the bottom.

Do not stack originals beyond the limit mark on the side fence of the docu- ment feeder.

When copying thin originals (40 – 52g/m2, 11 – 14 lb. Bond), set one original in the document feeder at a time or place it on the exposure glass to avoid damage due to a multi-sheet feed (several pages fed together at the same time).

The original might become dirty if it is written with a pencil or similar tools.

Usually, one-sided originals are delivered to the ADF external tray, and two- sided originals to the ADF tray.

Reference

Regarding originals that the document feeder can handle, see ⇒ P.19 “Origi- nals”.

32

Page 48
Image 48
Ricoh 551, 700 manual Setting Originals in the Document Feeder, Lower the document feeder