Ricoh 700, 551 manual Removing Jammed Staples, 293

eRemoving Jammed Staples

eRemoving Jammed Staples

Note

❒Staples might be jammed because of curled copies. In this case, try turning the copy paper over in the tray. If there is no improvement, change the copy pa- per with less curls.

❒After removing jammed staples, staples might not be ejected the first few times you try to use the stapler.

❒If the optional booklet finisher is installed, initialize the staple unit for the Saddle Stitch function with the User Tools (System Settings) after adding sta- ples or removing jammed staples. If you do not, misfeeds might occur. See “Staple initialization” in the System Settings manual.

50-Sheet Finisher

• 1: Open the front cover of the finisher.

• 2: Pull out the staple unit.

R7

ZBQP610E

• 3: Lift the cartridge until it clicks.

ZBQP620E

5

293