Ricoh 700, 551 manual 187

Stamp

Limitation

❒You cannot use the bypass tray with this function.

❒One message can be stamped at a time.

❒In Connect Copy mode, register the same user stamp on the master unit and sub-unit.

❒If the position exceeds the page boundary, the stamp will not be printed on

copies. 2

Note

❒You can change the print page with the User Tools.

❒You can choose the default settings for the print page and the stamp position with the User Tools. See “Stamp condition” and “Stamp position”in ⇒ P.325 “User Stamp”.

❒You can combine this function with only one Preset Stamp.

❒You cannot combine the User Stamp function with the Image Repeat or Dou- ble Copies function.

❒The relationship between the direction in which you set the original and stamp Orientation/Position is as follows:

GCSTMP6E

❒You can change the stamp position to top, bottom, left and right each way in 1mm, 0.1" steps. See “Stamp position” in ⇒ P.325 “User Stamp”.

187