Ricoh 551, 700 manual Auto Reset, Auto Off, Press the Start key

Copying

Note

❒The maximum copy quantity can be set between 1 and 999 (default: 999). See “Maximum Copy Quantity” in ⇒ P.313 “General Features 2/3”.

❒To change the number entered, press the {Clear/Stop} key and enter the new number.

GPress the {Start} key.

2 The machine starts copying.

Note

❒When you set originals on the exposure glass, press the {#} key after all originals are scanned.

❒Usually, when you set a single original on the exposure glass or in the doc- ument feeder, the copied paper is delivered face up. However, with some functions, copies will be delivered face down.

❒You can choose to have copies delivered either face up or face down (ex-

cept for copying through the bypass tray). See “Face-Up/Down Selection in Platen Mode” in ⇒ P.329 “Input/Output”.

❒To stop the machine during the multi-copy run, press the {Clear/Stop}key.

❒To return the machine to the initial condition after copying, press the {Clear Modes/Energy Saver}key.

-Auto Reset

The machine returns to its initial condition automatically when your job is fin- ished, after a certain period of time. This function is called “Auto Reset”.

Note

❒You can change the Auto Reset time. See “Auto Reset Timer” in ⇒ P.310 “General Features 1/3”.

-Auto Off

The machine turns itself off automatically after your job is finished, after a cer- tain period of time. This function is called “Auto Off”.

Note

❒You can change the Auto Off time. See “Auto Off Timer” in the System Set- tings manual.

30