Ricoh 551 If you set originals in the document feeder, If you set originals on the exposure glass

Connect Copy (Option)

Note

❒Any copy settings that were set up before you entered Connect Copy mode will still remain in effect. However, if optional finishers are not installed on both the master unit and sub-unit, the Stack, Staple and Punch functions will be automatically disabled.

❒To exit Connect Copy mode, press the [Connect] key on the master unit again.

Reference

For more information on functions you can use with Connect Copy, see ⇒ P.13 “Function List Based on Options”.

EEnter the number of copies you require using the number keys.

4 Sample Copy

Start

Clear/Stop

Enter

TSPS020N

Note

❒You can enter up to 999 copies.

❒If you make a mistake, press the {Clear/Stop}key and enter a new number.

❒Even though Connect Copy is selected, only the master unit will make cop- ies in the following situations:

•When making a single copy set

•When the original is a single sheet and you enter a low number of cop- ies/sets

FPress the {Start} key on the master unit. Copying starts after the original has been scanned.

If you set originals in the document feeder

A Copying starts simultaneously in the master unit and sub-unit after all originals have been scanned.

If you set originals on the exposure glass

A Set the next page(s) when scanning has finished, then press {Start}key.

B When all pages have been scanned in, press the {#} key. Copying starts simultaneously in the master unit and sub-unit.

232