Ricoh 551, 700 manual If You Cannot Make Copies As You Want, 258

5

What to Do If Something Goes Wrong

If You Cannot Make Copies As You Want

General

Problem	Cause	Action
Copies are not stapled.	There are jammed staples	Remove jammed staples.
	in the stapler.	See ⇒ P.293 “e Removing
		Jammed Staples”.

		Note
		❒ After removing jammed
		staples, staples might
		not be ejected the first
		few times you try to use
		the stapler.
	The number of copies ex-	Check the stapler capacity.
	ceeds the capacity of the	See ⇒ P.60 “Staple”.
	stapler.
	Copy paper is curled.	Turn the copy paper over
		in the tray.
Staples are wrongly posi-	Originals are not set cor-	Set originals correctly. See
tioned.	rectly.	⇒ P.60 “Staple”.
Misfeeds occur frequently.	Copy paper size setting is	Set the proper paper size.
	not correct.	See ⇒ P.282 “Changing the
		Paper Size”.
You cannot combine sever-	Selected functions cannot	See ⇒ P.206 “Combination
al functions.	be used together.	Chart”.
When sorting, the pages	The memory became full in	You can interrupt the copy-
are divided into two	the middle of sorting and	ing when the memory be-
blocks.	the pages were ejected in	comes full. See “Memory
	two blocks.	Full Auto Scan Restart” in
		⇒ P.329 “Input/Output”.

Connect Copy

Problem	Cause	Action
Cannot stack, staple or	The optional finisher or	Press the [Connect] key to
punch.	punch kit is not installed in	exit Connect Copy mode,
	the sub-unit.	then copy using stack/sta-
		ple/punch.

258