Ricoh 700, 551 manual How Connect Copy Works, Connectable Copier Models, 225, Master unit Sub-unit

How Connect Copy Works

How Connect Copy Works

In this manual, we refer to the two machines as the master unit and sub-unit re- spectively.

4

ZBQP190E

1.Master unit

2.Sub-unit

As your original is scanned in, the image data is stored on the master unit hard disk and transferred simultaneously to the sub-unit hard disk. As soon as scan- ning has finished, copying starts.

The master unit is the machine at which you press the [Connect] key to enter Con- nect Copy mode. When you do this, the other machine becomes the sub-unit. You can use either machine as the master unit or sub-unit, but you cannot change the relationship without exiting Connect Copy mode first.

Connectable Copier Models

• The master unit and sub-unit do not have to be same speed models.

Master Unit	Sub-Unit
55 copies/minute copier	55 copies/minute copier
55 copies/minute copier	70 copies/minute copier
70 copies/minute copier	55 copies/minute copier
70 copies/minute copier	70 copies/minute copier

•You can still use Connect Copy even if no optional finisher, booklet finisher, or large capacity tray (LCT) is available. However, the optional finisher must be installed in both units in order to use the Stack and Staple functions, the optional finisher and punch kit must be installed in both units in order to use the Punch function, and the optional booklet finisher must be installed in both units in order to use the Stack and Saddle Stitch function.

225