Ricoh 700, 551 manual If Your Machine Does Not Operate as You Want, General, 247

5.What to Do If Something Goes Wrong

If Your Machine Does Not Operate as You Want

General

Machine Status	Problem/Cause	Action
The machine instructs you	The machine is warming	Wait for the machine to
to wait.	up.	warm-up.
		Reference
		You can use Auto Start
		mode during warm-up
		period. See ⇒ P.90 “Au-
		to Start”.
	Copy paper is moving in	Wait for the machine.
	tray 1 (Tandem Tray).
The machine cannot detect	Improper original is set.	Set non-standard size orig-
the original size.	See ⇒ P.21 “Sizes difficult to	inal on the exposure glass.
	detect”.	See ⇒ P.31 “Setting Origi-
		nals on the Exposure Glass”.
		Select paper manually, not
		in Auto Paper Select mode.
		Do not use Auto Reduce/
		Enlarge mode.
	Original is not set.	Set your originals.
The machine instructs you	There is no copy paper that	Set the original in the same
to check the original direc-	is in the same direction as	direction as the copy paper.
tion.	the originals.
The machine instructs you	Improper original size is	Select the proper paper
to check paper size.	set.	size.
The machine cannot per-	The size of paper for which	Select the proper paper
form rotate-sorting for this	no rotate-sorting is avail-	size. See ⇒ P.55 “Sort”.
paper size.	able is selected.
The machine cannot punch	--	Select the proper paper size
this size of paper.		that can be used in Punch
		mode. See ⇒ P.69 “Punch”.

247