Ricoh 700, 551 manual To set the file name, 213, Enter a file name, Press the Change File Name key

Scanning Originals

The “Doc. server: Scanning” display appears.

C Enter a file name.	3
Note

❒If you do not wish to register a file name, go to step D.

❒If you do not register a file name, it is stored automatically.

To set the file name

APress the [Change File Name] key.

BEnter the new file name using the letter keys on the display panel.

Note

❒You can enter up to 8 letters.

❒To switch to the capital letter mode or small letter mode, press the [Upper Case] or [Lower Case] key.

❒To change the letter entered, press the [Back Space], [Clear], or {Clear/ Stop} key and enter new letters. To delete the entered letters in 1 letter

steps, press the [BackSpace] key. To delete all the entered letters, press the [Clear] or {Clear/Stop}key.

CPress the [OK] key.

DEnter your password.

Note

❒ If you do not wish to enter a password, go to step E.

213