Craftsman 536.88112 HOW to Adjust or Replace the Friction Wheel, HOW to Adjust the Belt Guide

Models: 536.88112

1 60
Download 60 pages 11.33 Kb
Page 27
Image 27

ger Drive Belt" in the Service And Adjustment section.

9.Adjust the belt guide. See "How To Adjust The Belt Guide" in the Ser- vice And Adjustmentsection.

10.Install the bolts on each side of the motor mount frame. See Figure 31.

11.Tighten the bolts on each side of the motor mount frame.

12.Install the belt cover.Tighten screw. See Figure28.

13.Check the adjustmentof the cables. See "How To Check And Adjust The

Cables" in the ServiceAnd Adjust- ment section.

14.Connectthe spark plug wire.

HOW TO ADJUST THE BELT GUIDE

1.Disconnect spark plug wire.

2.Remove the screw. Remove the belt cover. See Figure 28.

3.Engage the auger drive lever.

HOW TO ADJUST OR REPLACE THE FRICTION WHEEL

How To Check The Friction Wheel

If the snow thrower will not move for-

ward, check the traction drive belt, the traction drive cable or the friction wheel.

If the friction wheel is worn or damaged, it must be replaced. See "How To Re- place the Friction Wheel" in this section. If the friction wheel is not worn or dam- aged, check as follows.

1.Remove the gas from the gas tank. Stand the snow thrower up on the front end of the auger housing.

outdoors, away from fire or

,_ WARNING: Drain the gasoline flame.

2.Disconnect the spark plug wire.

. Measure the distance between the belt guide and auger drive belt. The correct distance is 1/8 inch (3.175 mm). See Figure 33.

_-_- o,/, Belt Guide

Ad_ger (_ _'_X\_" I/!ll_5hm)

I III0:!e_--_d ]

Figure 33

. If an adjustment is necessary, loos- en the mounting bolt for the belt guide. Move the belt guide to the correct position. "13ghten the mounting bolt for the belt guide,

,Install the belt cover. Tighten the screw. See Figure 28.

7. Connect the spark plug wire.

3.Remove the bolts on each side of the bottom panel. See Figure 34.

4.Loosen the bolts on each side of the bottom panel.

5.Remove the bottom panel.

Remove Top Bolt

(each side)

,2 eoettoLo,t; j

(Each Side)

Figure 34

6.Position the shift speed lever in the first forward gear.

7.Note the position of the friction wheel on the disc drive plate (See

F-001129J27

Page 27
Image 27
Craftsman 536.88112 operating instructions HOW to Adjust or Replace the Friction Wheel, HOW to Adjust the Belt Guide

536.88112 specifications

The Craftsman 536.88112 is a powerful and versatile snow thrower designed to tackle heavy snowfall and provide effective cleaning solutions for residential properties. With a combination of robust build quality and innovative features, this machine stands out in the market for both performance and ease of use.

One of the main features of the Craftsman 536.88112 is its powerful gas engine, which delivers significant torque to efficiently clear snow from driveways, sidewalks, and other surfaces. With a clearing width of approximately 24 inches, this snow thrower can handle large volumes of snow quickly, saving users valuable time during winter storms. The adjustable chute can rotate up to 180 degrees, allowing for precise control over snow direction and ensuring that you can clear pathways without unnecessary rework.

The machine incorporates an easy-start technology that ensures reliable ignition in cold weather, making it user-friendly even in the harshest winter conditions. It also features a six-speed transmission, which allows users to adjust the speed according to their preferences and the density of the snow being cleared. This flexibility makes the Craftsman 536.88112 suitable for various snow types, from light and fluffy powder to heavier, dense accumulations.

Another notable characteristic of the Craftsman 536.88112 is its durable construction. Built with heavy-duty materials, the snow thrower is designed to withstand the rigors of tough winter conditions, ensuring longevity and reliable performance throughout the season. Furthermore, the ergonomic handle and control layout are designed for maximum comfort, making it easier for users to maneuver the machine over large areas.

Maintaining the Craftsman 536.88112 is also straightforward, with features that facilitate regular upkeep. The easy-access oil drain and refill points, coupled with industry-standard maintenance protocols, help ensure that the engine remains in prime condition for years to come.

In conclusion, the Craftsman 536.88112 snow thrower is a reliable and efficient solution for homeowners looking to manage winter snowfall effectively. With its powerful engine, adjustable chute, and robust design, it stands as an excellent investment for those who face harsh winter conditions, ensuring that pathways remain clear and safe throughout the season.