KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR SNOW THROWER. Compare the illustrations with your SNOW THROWER
to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
Auger Drive Lever
Electric
Start
Button
Primer
Ignition Button
Key Switch
Box
Traction Drive Lever
Remote Chute
Control Lever
Crank Assembly
Chute Deflector
Discharge
Chute
Choke
Control Recoil
Throttle Starter
Control Handle Height
Adjust
Skid
Shear Pin
Figure 16
Auger Drive Lever -Starts and stops
the auger and impeller (snow gathering
and throwing)
Traction Drive Lever - Propels the
snow thrower forward and in reverse.
Speed Shifter Lever - Selects the
speed of the snow thrower (6 speeds for-
ward and 2 speeds reverse).
Crank Assembly - Changes the direction
of snow throwingthrough the discharge chute.
Chute Deflector - Changes the distance
the snow is thrown.
Discharge Chute -Changes the height
anddirection the snow is thrown.
Height Adjust Skid - Adjusts the ground
clearance of the auger housing.
Ignition Key - Must be inserted to start
the engine.
Recoil Starter Handle - Starts the en-
gine manually.
F-001129J 13
Choke Control - Used to start a cold
engine.
Primer Button - Injects fuel directly into
the carburetor manifold for fast starts in
cold weather.
Remote Chute Control Lever - Push
forward to discharge snow high and far.
Pull remote lever back to discharge snow
down.
Throttle Control - Controls the engine
speed.
Electric Start Button - (if so equipped)
Usedto starttheengineusing the 120 V elec-
tricstarter.
Shear Pin - Shear pins are designed to
break (to protect the machine) if an ob-
iect becomes lodged in the auger hous-
=ng.
Toolbox - spare shear pins and
spacers are located in toolbox.
Ddft Cutter -Cuts a path through snow
higher than the auger housing.