Camera Mounting - Standard Camera Bracket
Mounting your camera on the camera brackets
For the Standard Camera Bracket, shown at right, select the appropriate slot in the bracket that will best locate the tripod mounting thread on your particular camera.You may need to re- position the camera knob to another slot in order to achieve this.To re- move the knob simply slide the knob along the slot to the end that has the threaded hole. Carefully unscrew the knob out of the threaded hole, being careful not to crossthread the knob. Replace the knob into the appropriate slot by reversing the procedure.
The camera knob is a 2 piece knob, with an inner and outer knob. Before installing the camera knob in the bracket, turn the inner knob clockwise into the outer knob until it won’t turn anymore. Install the knob into the appropriate slot then into the tripod mounting hole of your camera.Turn the inner knob into the camera until it bottoms out, then turn the outer knob clockwise until the camera is tight on the bracket. Don’t worry about getting the camera level at this time, as this is a task you’ll need to do when you’re ready to shoot.
QuickPan IV Rotator with Standard Camera Bracket and optional
complished by loosening the purple knob and sliding the camera bracket in and out of the slider. Be sure to tighten the knob to lock the bracket in place.
The
There are camera adjustment shoes and lugs (shown at left) to help locate your camera on the bracket and to help position the camera along the slot.These devices will also make it easy to remove and replace your cam- era when you use it for other tasks.
Note:You can also mount the optional Quick Release Plate onto the Standard Camera Bracket.
The
