Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International BELGIUM. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don’t change
Fax +32 2 359 95 50 the page numbering. Keep the language integrity. Print only what is inside the frame,
1. | Locking cap with feeding | 5. | Stainless steel blades |
| opening | 6. | Blade fixing ring |
2. | Lid | 7. | Motor block |
3. | Tempered glass mixing jar | 8. | Switch (P / 0 / 1 /2) |
4. | Sealing ring | 9. | Jar assembly |
IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the requested breaks. Failure to follow this instruction carefully may result in damage to the motor. The maximum continuous usage time is 1 minute. After 1 minute of continuous use, you should insert a break of at least 10 minutes.
ASSEMBLY OF THE BLENDER AND USE
CAUTION!
If the blade is disassembled from the bottom of the jar, check the cleaning section for mounting instructions before continuing.
•Put pouring jar on the motor block and make sure it is correctly inserted.
•Remove the lid of the blender.
•Fill the pouring jar with the chosen ingredients.
•Close the lid.
•Plug in the appliance.
•Choose the mixing speed with the button on the motor base. The position 0 corresponds to the stopping of the appliance, the position 1 to the slow speed and the position 2 to the fast one.
•The position "P" (Pulse) is particular because the button has to be kept manually. This position is generally used to crush ice in order to avoid damages on the blades, but it can also be used to complete the mixing.
•It is also possible to add liquids or other ingredients anytime without stopping the appliance. You only have to remove the cap, which closes the feeding opening by turning and raising it straight up.
5 | USK BL 16909/16911 - 110127 |
Assembly page 5/24