Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International BELGIUM. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don’t change
Fax +32 2 359 95 50 the page numbering. Keep the language integrity. Print only what is inside the frame,
a safety, which prevents the pouring jar from working if it is not assembled correctly.
16.The appliance is designed for the preparation of small quantities of food, which have to be consumed rather quickly. It is not designed for the preparation of large quantities at once.
17.Keep hands and utensils out of container while blending to reduce the risk of severe personal injury and/or damage to blender. A rubber spatula may be used but must be used only when blender is not running.
18.Do not use a broken, chipped or cracked blender jar.
19.To reduce the risk of injury, never place the cutting unit blades on base without jar properly attached.
20.Blades are sharp, handle with care.
21.Always operate the blender with cover in place.
22.Always close the jar with the lid before starting mixing. When mixing hot liquid, do not fill more than 2/3 of the jar and be very careful in order to avoid splashing of hot liquid, otherwise you can get burned. Do not forget to close the feeding hole of the pouring jar with the cap.
23.Screw on blade assembly firmly. Injury can result if moving blades accidentally become exposed.
24.Do not leave blender unattended while it is operating.
25.To disconnect cord, turn the speed selector to "0" , then remove the plug from wall outlet.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
POLARIZED PLUG INSTRUCTIONS
Some appliances are equipped with a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit into the polarized outlet only one way. If the plug does not properly fit into the outlet at first, reverse it. If it still does not fit, contact a competent qualified electrician. Do not attempt to modify the plug in any way.
3 | USK BL 16909/16911 - 110127 |
Assembly page 3/24
