Kalorik USK BL 24088, USK BL 25887 manual Important Information, Assembly of the Blender and USE

￿

IMPORTANT INFORMATION

This appliance is not for professional use. You should follow the requested breaks. Failure to follow this instruction carefully may result in damage to the motor. The maximum continuous usage time is 10 seconds. After 10 seconds of continuous use, you should insert a break of at least 3 seconds.

Don’t make this unit work continuously more than one minute. Stop working when the outer housing becomes hot. In order to prolong the life of the unit, please continue to use this unit only when it has cooled down.

The unit has a motor-protecting device. The power is automatically switched off when the temperature of the motor is too high. The blender can resume operation automatically after it has cooled down (approximately after 15 minutes).

ASSEMBLY OF THE BLENDER AND USE

NOTE: Do not operate with nothing in the cup. Water or other liquids must be added, with a maximum total volume of 500ml /16 ½ Fl. Oz.

•Assemble the pouring jar on the motor block and make sure it is correctly positioned; otherwise the appliance will not work. Position the jar vertically above the motor block and turn counter-clockwise to lock it in place.

•Remove the lid of the blender.

•Fill the pouring jar with the chosen ingredients.

•Close the lid.

•Plug in the appliance.

•The switch has to be kept on manually for the blender to operate. Do not operate more than 10 seconds at a time, pause for 3 seconds after each cycle.

•By switching on and off quickly, you create a pulse. This is generally used to crush ice in order to avoid damages on the blades, but it can also be used to complete the mixing.

5USK BL 24088 BL 25887 - 100603