ASSEMBLING THE STAND
To setup the Iron Press Stand correctly refer to the following instructions:
1.Remove the stand from the carton and carefully dispose of the packaging material.
2.Place the stand in the upright position with the feet on the floor. Open the legs of the stand so that the unit can stand freely (see Fig. 1).
3.Swing the iron press base plate (a) over and connect the support leg to the plate through the opening slit (see Fig. 2). Lock the support leg into position with lever (b) (see Fig. 3).
4.Take the wire clothes rack and connect to the legs of the base as shown (Fig. 4).
5.Take the iron press and sit in place on the stand plate. Pass one end of the Velcro strap through the unit in between the upper and lower arms as shown (Fig 5). Secure tightly to the other strap.
NOTE: This stand is to be used with the steam press USK STP 1.
5
1
2
3
4
2USK STP 20159 STAND - 070502
