Use caution when pouring water from the kettle, as boiling water and steam will scald. Do not pour the water too quickly.

To protect against electric shock, do not immerse the kettle base, power base, power cord or power plug in water or allow moisture to come in contact with these parts.

Do not remove the kettle from the power base during operation. Ensure the kettle has switched off after the water has boiled or

reached the selected temperature, before removing the kettle from the power base. If the kettle is removed from the power base during the boiling cycle the kettle will automatically switch off.

Do not move the kettle while it is switched on.

Do not open the lid during operation.

Keep the kettle clean. Follow the cleaning instructions provided in this book on (page 9).

Important Safeguards For All Electrical Appliances

Fully unwind the power cord before use.

Do not let the power cord hand over the edge of a bench or table, touch hot surfaces or become knotted.

To protect against electric shock do not immerse the power cord, power plug or appliance in water or any other liquid.

The appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

It is recommended to regularly inspect the appliance. To avoid a hazard do not use the appliance if power cord, power plug or appliance becomes damaged

in any way. Return the entire appliance to the nearest authorised Kambrook Service Centre for examination and/or repair.

Any maintenance other than cleaning should be performed at an authorised Kambrook Service Centre.

This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.

The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.

5

Page 5
Image 5
Kambrook KAK36 manual Important Safeguards For All Electrical Appliances