Operating Instructions
Before First Use
Remove any packaging material and promotional labels before using your kettle for the first time.
It is recommended before the first use to fill the kettle to the maximum level with cold tap water, bring to the boil and then discard the water.Your kettle will only operate when positioned
on the power base with the ON/OFF switch in the ‘ON’ position. The kettle will automatically switch off once the water has boiled.
Operation Of Your Kettle
1.To fill the kettle with water, remove it from the power base and open the lid by pressing the button on the lid of the kettle and lifting it upwards.
Fill with the desired amount of water. Do not operate the kettle without water. Always fill the kettle between the minimum and the maximum marks on the water window. Too little water will result in the kettle switching off.
2.Ensure that the lid is closed and locked firmly into place before placing the kettle on the power base.
3.Place the kettle firmly onto the power base. Plug the power cord into a 230V or 240V power outlet and switch ‘ON’.
4.Press the ON/OFF switch to the ‘ON’ position. The power ‘ON’ light will illuminate.
NOTE: Never operate the kettle dry - too little water will result in the kettle switching ‘OFF’.
Do not overfill the kettle - filling above the maximum mark on the water window may result in boiling water splashing from the kettle.
NOTE: This kettle must only be used with the power base supplied. Use caution when pouring water from your kettle, as boiling water will scald. Do not pour the water too quickly.
NOTE: Do not remove the kettle from the power base during operation. Ensure the kettle has switched to the ‘OFF’ position after the water has boiled before removing the kettle from the power base.
5.The kettle will automatically switch ‘OFF’ once the water has boiled. Lift the kettle from the power base and pour the water. Take care to hold the kettle level, especially when filled to the maximum level. To re- boil it may be necessary to wait for a few seconds to allow the control to reset.
The kettle should be stored on its power base when not in use. The power outlet should be switched off and the power cord unplugged from the power outlet when not in use.
7
