Maintaining Your
Kambrook Elite Kettle
Safety Boil Dry System
Your Kambrook Elite Kettle is fitted with a safety device that protects against overheating should the kettle be operated with insufficient water. In this instance, the kettle will immediately cease heating.This feature will turn the kettle off and allow the kettle to cool before further operation.The device will automatically reset itself when the unit has cooled sufficiently.
Thermal Cut-out
This feature has been built into your Kambrook Elite Kettle. In the event that your kettle does malfunction this feature will prevent overheating.This safety feature will automatically shut down the kettle to prevent further damage (and usage). In the event that this occurs, please take your kettle to an authorised Kambrook Service Centre.
Cleaning
WARNING! NEVER IMMERSE THE KETTLE, POWER BASE, CORD OR PLUG IN WATER OR ANY OTHER LIQUID
Always switch off at the power outlet and then unplug before cleaning, moving or storing the appliance.
Additionally ensure that moisture does not come into contact with cords, plugs or cordless contact points.
Interior Cleaning
Removal of Mineral Deposits
Mineral deposits in the water may cause the kettle interior to discolour.
This may be removed by using a Kettle Descaler available from most supermarkets and hardware stores. Alternatively fill the kettle with 3 cups of white vinegar and the remainder with water and allow to stand overnight.
DO NOT BOIL. Empty the solution from the kettle.
Fill the kettle again with clean water, bring to the boil and discard the water.
Repeat and the kettle will then be ready for use.
Exterior Cleaning
Always ensure that the power is switched off and disconnected prior to cleaning.
Exterior of the kettle can be cleaned with a damp cloth and then dried with a dry clean cloth.
Do not use abrasives, harsh cleaning solutions, chemicals or hard brushes for cleaning as these may scratch and damage the unit.
5
