Using Your Kambrook Jaguar Vacuum Cleaner

When unpacking the vacuum cleaner unit check to see you have received all the required components, such as the hose

ALWAYS ENSURE THAT THE DUST CONTAINER AND THE MOTOR PROTECTION FILTER ARE CORRECTLY FITTED. NEVER OPERATE WITHOUT THE DUST CONTAINER AND FILTERS IN

Turn off the vacuum cleaner when changing any attachments.

Dust container indicator and dispensing the dust container

IMPORTANT: DO NOT USE THE UNIT WITHOUT A DUST CONTAINER IN

PLACE

Cleaning and replacing filters

and other accessories before discarding the packaging.

Ensure that the dust container and filters are correctly fitted.

Locate the crush proof hose and push the connection point into the hose inlet connection on the front side of the unit, until a “click” sound is heard.

Connect the wide end of the metal wand to the hose end, and push together firmly.

Fit the floor tool to the narrow end of the wand and push together firmly.

Fully extend the power cord by pulling the power plug (situated at the rear of the unit) out from the unit, until the yellow tape on the cord is shown.

ENSURE THAT YOU DO NOT OVER EXTEND THE POWER CORD - DO NOT EXTEND PAST THE RED WARNING TAPE ON THE CORD

Plug into a 230/240v power point and switch the power on.

To commence vacuuming push down on the on/off button at the top of the unit.

When vacuuming is complete, push down on the ‘on/off’ button to switch off. Turn the power off at the outlet and then remove the power cord from the power outlet. When removing plug from the power outlet grasp the plug not the cord.

To retract the cord push down on the ‘cord rewind’ to retract the cord.

IMPORTANT: HOLD THE PLUG END WHEN RETRACTING THE CORD TO PREVENT IT FROM STRIKING YOU OR THE VACUUM.

PLACE.

Variable Power Control

The power booster dial on the unit is to be used for variable power control. Turn the control clockwise for maximum power for vacuuming hard floor and carpet surfaces. Turn the control anti-clockwise for minimum power when using the crevice and brush tools.

Crevice and brush tool accessories

The crevice tool is ideal for vacuuming hard to reach places such as the edges along skirting boards.

The brush tools can be used to vacuum delicate surfaces and areas such as shelves and venetian blinds.

Set the variable speed control between minimum and medium power when using the tool accessories.

The dust container should be emptied when the dust and dirt reaches the MAX level.

Always switch the appliance off, then switch off at the power outlet and unplug the appliance prior to replacing filters or emptying the dust container.

To remove the dust container, ensure the unit is down on its wheels; Remove the dust container by pressing down on the “Press and Lift” button on the dust container. Once released slowly pull the container upwards.

To empty the dust container simply place it above the rubbish bin; press the “push to empty” button. The bottom of the container will release and the dust and compiled dirt will be dispensed.

Filters must be cleaned from time to time to remove the fine dust particles that have been collected.

1.Remove the dust container from the unit by pressing down on the “Press and Lift” button

2.Then press the “Push to Empty” button. The bottom of the container will release. Take off the filter bracket by holding onto the shaft and turning the filter in an anti-clockwise direction and the filter and its bracket will be released.

3.To remove the metal filter bracket, simply lift it vertically. The filter bracket can be rinsed in luke warm water. Ensure you let the filter bracket completely dry naturally before next use.

4.Shake and tap the HEPA filter until

all the fine dust particles are removed. However, after approximately 6 months the HEPA filter should be replaced.

5.To place the filter back in the dust container simply place the metal filter bracket directly over the HEPA filter, ensure that the metal filter holder is completely dry before use. Ensure that the grooves on the HEPA filter holder and metal filter bracket fit into place.

6.Simply place the filter unit in the dust container lid and turn the filter unit in a clockwise direction until it is clicked in place. Close the bottom of the container.

7.Place the dust container back in the vacuum cleaner for next use.



KBV50.indd 4-5



9/5/07 11:42:25 AM

Page 2 Page 4
Page 3
Image 3
Kambrook KBV50 manual Using Your Kambrook Jaguar Vacuum Cleaner, Dust container indicator and dispensing the dust container
Page 2 Page 4

KBV50 specifications

The Kambrook KBV580 and KBV50 are two innovative kettles designed to enhance your tea and coffee brewing experience. Both models boast an impressive combination of features and technologies that cater to different user preferences while maintaining Kambrook's commitment to quality and functionality.

The Kambrook KBV580 is a well-rounded kettle that offers a sleek design and user-friendly interface. One of its standout features is the rapid boiling technology, allowing water to boil in a matter of minutes, making it an ideal choice for those who are always on the go. The KBV580 is equipped with a 2400-watt power rating, ensuring efficient performance and quick heat-up times. This kettle also features a 1.7-liter capacity, making it suitable for both single servings and larger quantities for gatherings or family use.

A significant characteristic of the KBV580 is its temperature control feature, which allows users to choose the perfect temperature for different types of teas and coffee. Whether you prefer green tea, black tea, or herbal options, the kettle allows for precise temperature settings, ensuring the best flavor extraction. Additionally, the kettle includes a keep-warm function, maintaining the desired temperature for an extended period, so you can enjoy multiple cups without needing to reboil.

On the other hand, the Kambrook KBV50 is designed with simplicity and effectiveness in mind. This model focuses on delivering the essential features without the complexity of more advanced options. It still offers rapid boiling capabilities and is built with a 2200-watt power rating, making it a reliable choice for quick hot water preparation. The KBV50 has a slightly smaller capacity of 1.5 liters, perfect for smaller households or those who rarely serve more than a couple of cups at a time.

Both kettles are made with high-quality stainless steel, ensuring durability and a modern aesthetic to complement any kitchen style. The dual water level indicators allow for easy monitoring of water levels, while the push-button lid provides convenient filling options. Additionally, both models prioritize safety with features such as automatic shut-off and boil-dry protection, alleviating concerns over potential hazards.

In summary, whether you choose the Kambrook KBV580 for its advanced features or the KBV50 for its straightforward design, both kettles reflect Kambrook's dedication to delivering efficient and stylish kitchen appliances. These kettles are suitable for a wide range of users, enhancing everyday hot beverage preparation with reliability and ease.
Top Page Image Contents