CLEANING AND REPLACING FILTERS
Filters must be cleaned from time to time (at least twice a year) to remove the fine dust particles that have been collected.
1.Remove the dust container from the unit by pressing down on the “Press and llift” button
2.After removing the dust container, hold steadily on the dust container and twist the lid clockwise until ‘click’ sound is heard and the lid of the dust container is detached.
3.Take off the combined mesh and HEPA filter by holding steady on the lid of the dust canister and twisting the combined mesh and HEPA filter
4.Tap and shake the filter until all the fine dust particles are removed. However, after approximately 6 months the filter should be replaced.
5.To place the filter back in the dust canister simply place the combined mesh and HEPA filter in the dust container lid and turn the filter in a clockwise direction until ‘click’ sound is heard to lock it in place.
6.To fully assembled the dust filter unit, simply placed the combined filter and lid together with the dust container. Hold steady on the dust container and twist the lid in
7.Place the complete dust container assembly back in the vacuum cleaner for next use. Ensure the bottom of the dust container is closed prior to replacing the dust container.
MOTOR PROTECTION FILTER
The motor protection filter must always be in place when operating the vacuum otherwise damage to the motor may occur.
To replace the motor protection filter
-remove the dust container. The motor protection filter is located at the bottom of the inner chamber. Pull the filter upward to remove then simply replace the new filter.
EXHAUST FILTER
The exhaust filter should be cleaned every six months. Simply unclip the grill at the back of the vacuum cleaner and shake and tap the filter to remove any dust accumulated. Then relocate the filter and reattach the grill.
CARE AND MAINTENANCE
Always switch appliance off, then switch off at the power outlet and unplug the appliance prior to cleaning or replacing either filter.
To clean the outside of the unit, wipe the exterior with a soft, damp cloth. Never use an abrasive cleaner.
CHECK AND REPLACE BOTH THE MOTOR PROECTION AND HEPA FILTERS APPROXIMATELY TWICE A YEAR OR WHEN VISIBLY CLOGGED
