22.Switch off at the power on/off switch and power outlet, then unplug and allow heater to cool down before cleaning or storing.

23.Use this heater only as described in this instruction manual. Any other use not recommended by the manufacture may cause fire electric shock or injury and voids all warranties.

24.Regularly inspect the supply cord, plug, control settings, air inlets and outlets and main housing for any damage. If found damaged in any way, immediately cease use of the heater and return to Kambrook or an authorised service agent for inspection or repair.

25.The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit. See your electrician for professional advice.

HOW TO OPERATE:

1.Remove your heater from its carton and associated protective wrapping, and unwind the cord to its full length and remove any protective cardboard or foam that may have been used to minimise transportation damage. Place the heater on a firm, level surface in a stable upright position. Visually inspect the air inlet and outlets to ensure no foreign material is blocking these areas. The heater must always be operated with the rear air filter in position.

2.Plug the cord into a 230-240V electrical outlet. Be sure the plug fits tightly as a loose fit will cause overheating and damage the plug. To avoid an electrical circuit overload, it is recommended that no other appliances are plugged into the same circuit with your heater when you switch the unit on.

3.When the heater is initially plugged in and the power switch is turned on at the rear of the unit there will be a ‘beep’ and the power indicator will light up. This indicates that the unit is powered. The indicator will remain lit until the power switch on the rear of the unit is switched off.

4.Turn the heater on by pressing the Setting button.

5.Upon turning the heater on, the unit will be in the LOW heat mode (1100 watts), ‘LO’ and the current room temperature will appear on the LED display.



6.Pressing the Setting button again at this stage will set the heater into the HIGH heat mode (1800 watts), ‘HI’ and the current room temperature will appear on the LED display.

7.Pressing the Setting button again will set the heater into the AUTO mode (1800 watts). The LED will display the default temperature of 25ºC and will flash. This flash indicates you can set the desired temperature via the thermostat knob on the top of the unit.

8.Pressing the Setting button once more will set the heater into the FAN mode, ‘FA’ and current room temperature will then appear on the LED display. FAN mode is for fan-only operation with no output of heat.

9.Pressing the Setting button again will cause the heater to go back to the LOW heat mode. Continuing to press the Setting button will cycle the unit through LOW, HIGH, AUTO & FAN mode.

10.To turn the heater off, press the Setting button for approximately two to three seconds until you hear a ‘beep’. Turn off the power on/off switch and power outlet and remove the plug from the power outlet.

OSCILLATION FUNCTION:

This function will work in any mode. Pressing the Oscillate button (OSC) will allow the heater to oscillate back and forth.To stop the unit oscillating, press the Oscillate button once more.

Page 3 Page 5
Page 4
Image 4
Kambrook KCE42 manual HOW to Operate, Oscillation Function
Page 3 Page 5

KCE42 specifications

The Kambrook KCE42 is a versatile and efficient kitchen appliance designed to elevate your cooking experience. This multi-purpose electric kettle stands out for its combination of modern design, advanced technology, and user-friendly features, making it an essential addition to any kitchen.

One of the key characteristics of the Kambrook KCE42 is its chic aesthetic appeal, featuring a sleek stainless steel body that not only enhances its durability but also contributes to a contemporary kitchen decor. The kettle boasts a generous capacity of 1.7 liters, allowing users to prepare ample servings for family or guests without the need for constant refilling.

Equipped with a powerful 2200-watt heating element, the KCE42 ensures rapid boiling, cutting down on waiting time and making it ideal for busy mornings or impromptu tea sessions. The kettle features an automatic shut-off function, which activates once the water reaches boiling point, providing peace of mind and energy efficiency. In addition, the boil-dry protection technology prevents the kettle from operating when there is insufficient water, safeguarding both the appliance and the user.

For added convenience, the Kambrook KCE42 features a cordless design with a removable base. This functionality allows for easy pouring and serving, eliminating the hassle of dealing with wires. The 360-degree swivel base accommodates both right- and left-handed users, making it a practical choice for any household.

Another noteworthy feature is the built-in water level indicator, which allows users to quickly gauge how much water is in the kettle, ensuring precise measurements for cooking or preparing beverages. The kettle also has a non-drip spout, which minimizes spills and mess during pouring.

The Kambrook KCE42’s easy-to-clean design includes a removable filter that traps impurities, enhancing the flavor and quality of your drinks while ensuring straightforward maintenance. Its combination of style, efficiency, and safety features makes the Kambrook KCE42 a standout choice for anyone looking to upgrade their kitchenware. With its impressive array of functionalities, this kettle proves to be a reliable companion for boiling water for tea, instant coffee, or even cooking pasta, making it a must-have for both casual cooks and culinary enthusiasts.
Top Page Image Contents