THERMOSTAT INSTRUCTION:
1.Press the Setting button until the heater is set to the AUTO mode.
2.To adjust the set temperature, rotate the Thermostat dial clockwise to increase the desired temperature and
3.The desired temperature can be set between 15ºC and 38ºC.
4.When the air temperature reaches 2º above the set temperature the heater will stop heating at once and stop blowing after approximately 15 seconds.
5.When the air temperature drops 1ºC below the set temperature the unit will reactivate.
SAFETY FEATURES:
This heater includes an audible alarm to warn that parts of the heater are overheating. If this alarm sounds, immediately turn the heater off and inspect for any objects on or adjacent to the heater that may cause high temperature. DO NOT OPERATE THE HEATER WITH THE ALARM SOUNDING.
Thermo Guard Overheating Safety Device
Your heater is fitted with a safety device that switches off the heater in the event of overheating. Should this heater stop working, turn off the heater and inspect for blockages in air inlet or outlets.Wait at least five minutes for the protection system to reset before attempting to restart the heater.
If the heater fails to operate or the safety device switches off again, return the heater to your nearest service centre for examination or repair.
CARE AND MAINTENANCE
•Always turn off and then unplug the heater before cleaning.
•Use only a clean, dry cloth to clean the external surfaces of the heater only.
•If the heater has collected dust or dirt inside the unit or around the elements, have the unit cleaned by a qualified service agent. Do not operate the heater in this condition.
•Do not attempt to open the case of the heater at any time there are no customer serviceable parts inside
•When not in use, pack the heater, preferably in its original box for best protection and store in a cool, clean and dry location.
•Regularly clean the air filter at the rear of the heater.
