Kambrook Recommends Safety First
IMPORTANT: Please retain your instruction book for future use.
Electric Blanket Type: WB1, WB2, WB3 and WB4
At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
Important Safeguards For Your Kambrook Snugasabug®
•Carefully read all instructions before operating the Kambrook Snugasabug®
•Remove any packaging material and promotional stickers before using the Kambrook Electric Blanket for the first time.
•Use the Electric Blanket only with the detachable controller KB31 provided. Refer to the markings on the heating unit for the model number of the controller.
•Connect only to a 230V or 240V power outlet.
•Use this blanket as an under blanket only.
•Not recommended for futons or similar folding bedding systems.
•This blanket is not recommended to be used on an adjustable bed. If used on an adjustable bed, check that the blanket or cord cannot become caught, creased, kinked or damaged in any way.
•Make sure that the heating area (wire element) on any side of the bed does not hang over the edge of the mattress and that the following instructions are read carefully before using the blanket.
•Do not use this blanket with an infant, an infirm person or anyone insensitive to heat.
•Use only for human use, not for pets.
•Overly extended application at a high setting can result in skin irritation or burns.
•Avoid sharp objects. Do not insert pins or any sharp objects into the electric blanket as they may damage the electrical wiring.
•Do not use pins – they may damage the electric wiring.
•Do not use folded, rucked or rolled.
•Do not tuck in.
•Do not use creased, folded or damaged in any way.
•Keep control unit away from an open window.
•Be sure that this blanket is used only on an alternating current supply circuit of correct voltage.
•The flexible power supply cord and controller must, as far as practicable, be kept outside the bed.
•Be sure that the electric blanket is installed so that at all times the flexible supply plug is adjacent and accessible to the main power outlet.
•Do not use the electric blanket if it is wet
•Switch off at the power outlet and remove plug when this blanket is not in actual use.
•This blanket must be kept in the fully spread condition at all times during use to avoid overheating. It is imperative
4
KEB302_IB_FA.indd 4 | 12/10/09 10:13 AM |
