Using Your Kambrook Pedestal Fan
Before First Use
Remove any promotional material from the fan.
IMPORTANT:
When unpacking the fan, check to see you have received all the items listed in the Parts List before discarding the packaging.
Assembling Your Kambrook Arctic HV Pedestal Fan
Base and Extension Tube
Assembly
1.Place the Fixing Tube into the hole of the Stability Plate (Fig. 1) then place both under the Base. Place the Washer on to the Locking Screw and fit through the hole at the bottom of the Stability Plate (Fig. 2).
Fig. 1
NOTE: The Washer fits into the groove on the bottom of the Stability Plate and is correctly fitted if the Locking Screw protrudes from the other side of the Base leaving enough thread to screw onto the Outer Extension Tube.
Fig. 2
2.Fit the Outer Extension Tube on to the Locking Screw and tighten the Locking Screw firmly. (Fig. 3).
Fig. 3
3.Unscrew the Height Adjustment Knob and pull up on the Inner Extension Tube to adjust the height, ensuring that the Height Adjustment Knob is fully tightened to hold in place before assembling the Fan Head. (Fig. 4).
Fig. 4
7
