Kambrook KFA423 manual Using Your Kambrook Pedestal Fan continued, Adjusting Air Flow Direction

Using Your Kambrook Pedestal Fan continued-

NOTE: The Inner Extension Tube is inside the Outer Extension Tube.

4.Mount the pre-assembled Fan Head to the Inner Extension Tube and tighten the Fan Head Screw until it is tight (Fig. 5).

Fig. 5

IMPORTANT: The prongs on the pre-assembled fan head assembly may need to be pried apart slightly to more easily fit on to the top of the extension tube. Do not force the pre-assembled fan head onto the extension tube.

5.Press the two Tilt Adjustment Knobs firmly on to the bolts located on either side of the fan head. (Fig. 6)

To Operate the Kambrook Arctic HV Pedestal Fan

Plug the cord into a 230V or 240V power point and switch on.

The fan has 3 speeds. To adjust the flow of air, turn the fan speed dial located at the back of the fan to the preferred speed - LOW, MED or HIGH. To turn Off, turn the fan speed dial to the OFF position.

NOTE: To avoid an electrical circuit overload, it is recommended that no other appliances are plugged into the same circuit as your fan when it is in use.

Adjusting Air Flow Direction

To adjust the flow of air left or right, manually swivel the fan to the desired position.

To adjust the flow of air up or down, slightly loosen the two tilt adjustment knobs located on either side of the fan and tilt the fan either upwards or downwards to suit. Once the fan is in the desired position, re-tighten the two knobs to hold in place.

Adjustable Height

The fan height can be manually adjusted. Simply loosen the Height Adjustment Knob on the Extension Tube of the fan, then adjust to the required height. Re-tighten the Height Adjustment Knob when the desired height has been reached (Fig. 6).

Fig. 6 Fig. 6

8