Using Your Kambrook Tower Fan

Bottom View

Before First Use

Remove your tower fan from its carton and associated protective wrapping.

Ensure that all parts listed are accounted for before discarding the packaging.

Unwind the cord to its full length and remove any promotional labels and or packaging materials from the tower fan.

Place the tower fan on a firm, level surface in a stable position. Visually inspect the air inlet and outlets to ensure no foreign materials are blocking these areas.

Assembling Your Arctic Tower Fan

To assemble the base stand:

1.The tower fan base stand comes in two separate pieces; piece (a) and piece (b) - that must be fixed together before being fitted to the fan body (see Fig.1).

2.To assemble the base stand, first carefully place the tower fan body on its side and unscrew the plastic connection ring screwed onto the stem on the base of the fan. Holding base stand piece (a), align the four locating posts on piece (b) with the corresponding slots found in base stand piece (a) and firmly push downwards until the base stand is securely fixed together (see Fig. 2).

(a)(b)

Fig. 1

(a)(b)

Fig. 2

Top view

(a)(b)

Cord

 

Groove

Fig. 3

3.Align the base stand with the tower fan body being sure that the power cord is situated to sit on top of the groove found in base stand piece (a) (see Fig. 3).

7

Page 8
Image 8
Kambrook KFA715 manual Using Your Kambrook Tower Fan, Before First Use, Assembling Your Arctic Tower Fan