Using Your Kambrook Arctic Tower Fan continued
To Operate the Arctic Tower Fan
Plug the cord into a 230V or 240V power point and switch on.
NOTE: To avoid an electrical circuit overload, it is recommended that no other appliances are plugged into the same circuit as your fan, when it is in use.
Select the desired air flow setting by pressing down a speed button:
OFF
LOW
MED
HIGH
Setting the Oscillation
The oscillation function works in all air flow settings.
Press down the Swing button to activate. The fan will begin to oscillate from side to side.
Press the Swing button again to stop the fan from oscillating.
Setting the Timer
The Arctic Tower Fan incorporates a two hour, count down timer, which will turn off the fan after the selected preset time has elapsed.
Turn the Timer dial clockwise to the desired position to operate the timer (up to 120 minutes).
Fig. 3
8