Know your Kambrook Snugasabug Fan Heater
1
KAMBROOK SAFETY
Congratulations on your choice of another quality Kambrook product. Your Kambrook Snugasabug Fan Heater has been designed and manufactured to
Do not operate any appliance with a damaged cord, plug or after the appliance malfunctions or has been dropped or damaged in any manner. Return to a qualified electrical person for examination,
5
2
high standards of engineering.With proper use and care, you can expect to receive many years of trouble free service. Please read these instructions carefully.
GENERAL CARE AND
SAFTY GUIDE
Before using your radiant heater, please read these instructions carefully and retain for future reference.
Use only the voltage specified on the rating plate of the appliance.
Do not cover or restrict airflow to the inlet of exhaust grilles in any manner as the appliance may overheat and become a fire risk.
Keep all objects at least 1 metre from the front, sides and rear of the appliance.
electrical or mechanical adjustment, service or repair.
This appliance is intended for household use only and not for commercial or industrial use.
Use this heater only as described in this manual.Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury to persons.
The most common cause of overheating is deposits of dust or fluff entering the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning air vents and grilles.
Do not use abrasive cleaning products on this appliance. Clean with a damp cloth rinsed in hot soapy water only.
3
| 4 |
Controls and Parts | 3.Tilt adjustment |
1. 2 heat settings plus fan only | 4. On/Off Neon indicator |
2.Thermostat control | 5.Thermo Guard protected |
Do not place appliance close to a heat source.
Do not operate in areas where gasoline, paint or other flammable liquids are used or stored.
Do not use the appliance to dry clothes.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause and electric shock, fire or damage to the appliance.
Always remove plug from the mains before cleaning.
Do not connect the applicance to the mains voltage until completely assembled and adjusted.
This applicance is hot when in use.
To avoid burns, do not let bare skin touch hot surfaces. Switch off and use handles where provided when moving.
Always operate on a flat horizonatal surface.
Do not operate with cordset coiled as a build up of heat is likely, which could be sufficient to become a hazard.
1 | 2 |
