NOTE: This heater features a tip- over switch. If the heater tips over, it will automatically switch off. Once placed back into the upright position, the heater will automatically switch on again.
Setting the Oscillation
The oscillation function works in all operating heat and fan modes.
Switch on the SWING |
|
| switch |
|
| ||
to activate. The heater |
| will | begin to |
oscillate from side to side. |
| ||
Switch off the SWING 
switch to stop the heater from oscillating.
ThermoGuard Overheating Safety Device
Your heater is fitted with a safety device that switches off the heater in the event of overheating. Should this heater stop working, turn off the heater and inspect the air inlet and outlet for blockages. Wait at least five minutes for the protection system to reset before attempting to restart the heater.
If the heater fails to operate or the safety device switches off again, return the heater to your nearest Kambrook Service Centre for examination or repair.
9
KFH540_IB_FA.indd 9 | 12/10/09 11:07 AM |
