Before using the hair clipper, make sure the blades are clean and well oiled. Unwind the cord to its full length, ensure that the on/off switch is off ‘O’ and plug the cord into a 230 /240V power outlet, then turn the power on.

Operate the hair clipper with the ON/OFF switch.

NOTE: For uniform cutting, never push or force the hair clipper through the hair at a fast speed.The hair clipper works most efficiently when it works at its own speed.

Adjustable Lever

The adjustable lever adds versatility to your hair clipper by allowing you to gradually change the closeness of your cut without using an attachment comb.

When the lever is in the uppermost position, the blade will give you the closest cut.To increase the cutting length, push the lever downward gradually.

The lever extends the variety of lengths that can be achieved with each attachment comb, by using the varying cutting edges with each attachment comb.

Attachment Combs

Attachment combs should be fitted to hair clipper by placing the top edge (comb edge) of the attachment comb over the top of the cutting blades.

Gently lift the tab at the other end of the attachment comb and push down until a click is heard.

Attachment Comb #1 – leaves hair approx. 3mm (1/8") in length

Attachment Comb #2 – leaves hair approx. 6mm (1/4") in length

Attachment Comb #3 – leaves hair approx. 9mm (3/8") in length

Attachment Comb #4 – leaves hair approx. 12mm (1/2") in length

Initially cut only a small amount of hair until you become accustomed to the length each attachment comb leaves the hair.

It is suggested to try the longest attachment comb on the hair clipper first, then use the shorter one if a shorter length is desired.

4

Page 4
Image 4
Kambrook KHC10B manual Adjustable Lever, Attachment Combs