KAMBROOK RECOMMENDS SAFETY FIRST
At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
IMPORTANT SAFEGUARDS FOR YOUR KAMBROOK HOT CUP
•Carefully read all instructions before operating the Kambrook HOT CUP for the first time and save for future reference.
•Remove and safely discard any packaging material and promotional labels before using the kettle for the first time.
•To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance.
•The appliance should always be placed on a firm level surface where normal access from persons (including children) with reduced physical, sensory or mental capabilities is restricted.
•This kettle has been designed specifically for the purpose of boiling drinking quality water only. Under no circumstances should this product be used to boil any other liquids or foodstuffs.
•Do not place the kettle near the edge of a bench or table during operation. Ensure that the surface is level, clean and free of water and other substances.
•Do not operate the Hot Cup on a sink drain board.
•Do not place the Hot Cup on or near a hot gas burner, electric element or where it could touch a heated oven.
•Keep the Hot Cup clear of walls, curtains and other heat or steam sensitive materials. Minimum 20cm distance.
•Always ensure the Hot Cup is properly assembled before use. Follow the instructions provided in this book.
•The Hot Cup must be used only with the power base supplied.
•The Hot Cup is not intended to be operated by means of an external timer or separate remote control system.
•Do not touch hot surfaces. Use the handle for lifting and carrying the kettle.
•Do not place anything on top of the lid.
•Always switch the power off at the power outlet and remove the power plug from the power outlet before attempting to move the appliance, when the appliance is not in use and before cleaning and storing.
•Do not place hand under the spout of the kettle during operation.
•Use caution when hot water is flowing out from the spout of the kettle, as boiling water and steam will scald.
•This kettle dispenses 250ml of hot water continuously per operation.
•It is not possible to interrupt and stop the hot water flowing out from the dispensing spout once one cup of water (250ml) has boiled. Therefore, you MUST ensure that a vessel/cup is capable of holding a minimum of 280ml capacity and is placed under the dispensing spout of the kettle on the drip tray. Do not overfill the cup as the water is very hot.
•It is recommended that a vessel/cup capable of accommodating a minimum of 280ml of very hot water is placed under the dispensing spout at all times to capture the dispensed water should the unit be inadvertently turned on.
•To protect against electric shock, do not immerse the Hot Cup base, power base, power cord or power plug in water or allow moisture to come in contact with these parts.
•Do not remove the Hot Cup from the power base during operation. Ensure the kettle has switched off after the water has boiled before removing the kettle from the power base.
KQK600_HOTCUP_IB_FA.indd 2 | 19/6/09 4:00:16 PM |
