IMPORTANT PRECAUTIONS
READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS HEATER.
When using electrical appliances, basic precautions should always be followed, including the following:
USE ONLY 230/240V a.c. EARTHED SUPPLY
•Remove packing supports from elements before using.
•Keep combustible materials such as drapes and other furnishing away from heater.
•Your Radiant Strip Heater is designed for wall mounting only.
DO NOT mount on ceiling or floor.
•The heater must NOT be located immediately below a socket outlet.
•Extreme caution is necessary when this heater is used by or near children or invalids.
•Young children should be supervised to ensure they do not play with the heater.
•Do not leave heater unattended. Always switch off the heater at the controls and at the power outlet then unplug heater from the power outlet when not in use.
•Do not operate any heater with a damaged cord or plug, or if heater has been dropped or damaged in any manner. Return heater to your nearest service centre for examination, electrical or mechanical adjustment or repair.
•Do not use outdoors.
•Place unit well clear of heat sensitive surfaces
•When in the ON position the neon light will illuminate.
•Do not run the cord under carpeting or cover the cord with rugs, runners or the like. Arrange cord away from traffic areas and where it will not be tripped over.
•To prevent a possible fire, allow ample space around the heater (at least 1.7m at front) and do not block front grill in any manner. Check the elements and grill from time to time for accumulated dust.
•To disconnect heater switch the control setting to the OFF position, then switch off at the power outlet prior to removing the plug from its outlet.
•Do not insert or allow foreign objects to pass through the element guard as this may cause an electric shock, fire or damage the heater.
•Do not touch hot metal surfaces.
•DO NOT IMMERSE in any liquid or allow liquids to be spilt on heater.
•Do not allow power cord to contact hot metal surfaces.
•Set the control setting to the OFF position then Unplug from power outlet and allow heater to cool down before cleaning or storing.
•Do not use the heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
2
