•Use this heater only as described in this instruction manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury and voids all warranties.
INSTALLATION AND
OPERATING
1.Remove your heater from its carton, unwind the cord to its full length. Remove all protective packaging
2.Your heater must be wall mounted and no closer that 25cm to ceiling, 200cm to floor, 25cm to side walls.
3.Remove the mounting bracket from the rear of the heater and secure to the wall, with the five screws supplied.
NOTE: Fixed wire installations should be performed
by a qualified electrician.
4.Hook heater base onto mounting bracket on wall.
5.Connect power (230/240V a.c.) by plugging into an earthed power point and switch on.
6.To switch heater on pull cord, until it clicks and the neon light illuminates
7.To switch heater off pull cord again, until it clicks and the neon light goes out.
CARE AND MAINTENANCE
•Always turn heater off and switch off at power outlet then unplug the heater before cleaning
•Use only a clean, dry cloth to clean the external surfaces of the heater only.
•Do not attempt to remove the front grill of the heater.
•Use a vacuum cleaner regularly to remove dust and fluff from the element and grill.
•If the unit has accumulated dust around the elements and grill that cannot be removed with the use of a vacuum cleaner, have a qualified service agent clean the unit.
•DO NOT operate the heater in this condition.
•Do not attempt to open the case of the heater at anytime, there are no customer serviceable parts inside.
•When not in use, pack the heater in its original box for best protection and store in a cool, clean and dry location.
3
