Set the control setting to the OFF position then Unplug and allow heater to cool down before cleaning or storing.
Do not use the heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
Use this heater only as described in this instruction manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury and voids all warranties.
Always move the heater with the handle provided.
Regularly inspect the supply cord, plug, control settings, air inlets and outlets and main housing for any damage. If found damaged in any way, immediately cease use of the heater and return to Kambrook or an authorized service agent for inspection.
The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit. See your electrician for professional advice.
WARNING: In order to avoid overheating do not cover the heater.
HOW TO OPERATE
Remove your heater from its carton; unwind the cord to its full length.
Remove any element supports Guards (ie foam or paper packing) by removing the front guard screws, lift the guard upwards, support and remove element supports. Return the guard to the normal position and replace screws.
Remove the warning sticker from the front grill.
Read and follow the complete instructions before plugging the unit into the
Remove the castors from their storage position on the base and using the same securing screws fit the castors so that they are positioned on the outer most securing holes n the base of the heater. The heater must never be operated without the castors secured in the correct position shown in figure 1.
Place the heater on a level surface in a stable position. Make certain the heater element control switch is in the OFF position.
Remove the power cord from the storage compartment on the rear, unwind the cord fully and plug the power cord in a 240Volt outlet.
Use the rotary switch to select the desired setting.The red indicator light will illuminate when the setting is selected.
Fig 1
NEVER OPERATE THE HEATER WITHOUT THE FRONT GRILL SECURELY IN POSITION.
TEMPERATURE SETTING
The heater has 2 heat settings.
•Setting 1 operates the top and middle elements at 1400 watts
•Setting 2 operates all three elements at 2400 watts
The temperature knob (HEAT) acts as an automatic thermostat and switches the top element off during setting 1 and both the top and bottom elements during setting 2:
•Turn both selector and temperature knob to high / max settings
•Once a comfortable room temperature has been reached, slowly turn the temperature knob anti- clockwise until you hear a click and the top and bottom elements turn off.
(Note: during Setting 1 only the top element is
controlled with the thermostat)
•At this setting your heater will automatically cycle high and low to maintain the desired room temperature
Note:There is a tip over switch fitted to this heater.
When the heater tips over, it will turn off
automatically.
CARE AND MAINTENANCE
•Always turn off the heater at the main controls and then switch off at power outlet before unplugging the heater before cleaning.
•Use only a clean, dry cloth to clean the external surfaces of the heater only.
•Do not attempt to remove the front grill of the heater. The front grill is designed to hinge upwards only and never to be removed completely.
•Use a vacuum cleaner regularly to remove dust and fluff from the element and grill.
•If the unit has accumulated dust around the elements and grill that cannot be removed with the use of a vacuum cleaner, have a qualified service agent clean the unit. DO NOT operate the heater in this condition.
•Do not attempt to open the case of the heater at anytime, there are no customer serviceable parts inside.
•When not in use, pack the heater in its original box for best protection and store in a cool, clean and dry location.
4 | 5 |
