Delta 50-770 instruction manual Maintenance, Transportation and Storage

TRANSPORTATION AND STORAGE

1.The dust collector features a convenient carrying handle with rubber grip (A) Fig. 29, which allows the unit to be carried easily from one job area to another.

IMPORTANT: THE DUST COLLECTOR WEIGHS APPROXIMATELY 46 LBS. CARE SHOULD BE TAKEN WHEN LIFTING AND TRANSPORTING THE MACHINE.

2.In addition to the carrying handle, the machine features a storage mounting bracket (B) Fig. 30, with a hole for mounting the dust collector to a wall or wooden support (when not in use).

A

Fig. 29

B

Fig. 30

MAINTENANCE

WARNING: Before any maintenance or service is performed, be sure the dust collector is discon- nected from the power source to prevent accidental starting. All maintenance other than the items recommended in this manual should be performed by an authorized Delta Service Center.

1.WARNING: Always disconnect the machine from the power source before performing any maintenance procedures.

2.The condition of the dust bag should be checked periodically for damage and emptied on a regular basis. Do not transport the machine with a full dust bag.

3.Clean and apply a dry silicone lubricant monthly to the impeller to remove any dirt or build-up of pitch, gum and wood shavings.

4.WARNING: Always make sure that the intake cap (A) Fig. 31, covers the intake port when the hose is not connected to the machine.

A

Fig. 31

13