8.Place lower support tube (B) Fig. 14, onto intake funnel assembly (A) and secure with tube clamp (C).
ASSEMBLING
VACUUM HOSE TO
DUST COLLECTOR
1.Place the intake cap holder (D) on the dust collector as shown in Fig. 15. NOTE: DO NOT COVER THE
INTAKE PORT WITH THE INTAKE CAP WHEN ATTACHING THE HOSE TO THE INTAKE PORT.
2.Place hose clamp (A) Fig. 15, onto one end of vacuum hose (B) and slide hose around intake port (C) as shown in Fig. 16. Tighten hose clamp (A).
A
C
B
Fig. 14
D
C
A
B
Fig. 15
C 
A
Fig. 16
8
