4.Align the two holes in the intake support angle brace
(A) Fig. 10 with the two holes in the intake funnel (B).
5.Fasten the intake support angle brace to the intake funnel by inserting the two 5/16-18x5/8" button head carriage bolts (C) thru the intake funnel (B) and the intake support angle brace (A) as shown in Fig. 11.
6.Place a 5/16" lockwasher (A) Fig. 12,onto the bolt (B), and thread a 5/16" hex nut (C) onto the bolt (B) and tighten securely.
7.Attach the upper support bracket (B) Fig. 13 to the intake support angle brace (C) with the adjustable locking lever (D). NOTE: PLACE A 5/16”
LOCKWASHER (E) FIG. 13, ONTO LOCKING LEVER SCREW BEFORE ATTACHING TO THE INTAKE SUPPORT ANGLE BRACE.
A
B
Fig. 10
A
B C
Fig. 11
A
B
C
Fig. 12
EC
DB
Fig. 13
7
