Delta 50-770 instruction manual Assembly, Assembling Wheel Casters, Assembling Outtake Flange

ASSEMBLY

ASSEMBLING WHEEL

CASTERS

1.Remove the hex nut and lockwasher from each of the four wheel casters.

2.Place the dust collector on its side.

2.Insert bolt from wheel caster through the four holes

(A) Fig. 3 in the base of the dust collector.

3.Place a lockwasher (A) Fig. 4 onto each bolt.

4.Thread hex nut (B) Fig. 4 onto each of the four bolt heads and tighten securely.

A

Fig. 3

B

A

Fig. 4

ASSEMBLING OUTTAKE FLANGE

1.Align the holes in the outtake flange (A) Fig. 5 with the holes in the outtake flange gasket (B).

2.Insert a 5/16-18x5/8" hex head bolt thru the outtake flange, outtake flange gasket and the base unit as shown in Fig. 6.

3.Thread a 5/16” hex nut (B) onto the 5/16-18x5/8" hex head bolt (A) Fig. 6 and tighten securely.

4.Repeat this process for the three remaining bolts.

B

A

Fig. 5

B

A

5

Fig. 6