Karcher 400 manual English, Puzzi 300 / 300 S, Working tips, AFTER OPERATION Storage

English

Puzzi 300 / 300 S / 400

13

Working tips

•The more sensitive the carpet, the smaller the amount of cleaning agent

•Carpets with jute backings can shrink and the colours can bleed if the treatment is too wet

•High pile carpets should be brushed off first

•Cleaning with warm water

(up to max. 50°C) is more effective

•Spray very dirty areas beforehand

•Work from light to dark areas (from window to doors)

•Work from clean areas to dirty ones

•Treat carpet with Care Tex RM 762 after cleaning (accessory).

•Wait until cleaned surface is dry before walking on it

•Use de-foaming agent RM 761 (accessory) for shampooed carpets.

AFTER OPERATION

Storage

!Remove unused cleaning fluids from the housing with suction hose

!Remove the floor nozzle and hold suction hose in a fresh-water tank. Turn "Suction" switch on. The cleaning fluid removed by suction is collected in the dirty-water tank

!Empty the dirty-water tank

!Fill fresh-water tank with 5l clean water

!Switch on spray switch

!Activate valve handle and rinse out unit for approx. 2 min.

!Switch off unit and pull the power plug.

CARE AND MAINTENANCE

Service agreement:

A maintenance contract for this unit can be signed with a Kärcher authorised dealer.

!Remove the cover

Unscrew the (1) float

Clean the (2) fluff strainer

Clean the (1) fresh water strainer Clean the float switch (2)

(only Puzzi 400)