English | BR VS 400 *USA |
9
INSTRUCTIONS FOR USE
WARNING!
The cleaner must always be in motion during operation!
Do not work on one spot as this may damage the floor covering!
Instructions for use
Prior to using the appliance on delicate surfaces (PVC, carpets)
–tilt it
–Switch the cleaning agent feed on
–Do not operate it until the machine
has been filled with cleaning agent.
Note:
The cleaning agent feed is effected only if the brush drive is switched on.
Scrubbing
*Remove loose dirt by brushing before working with the cleaner
*Match the amount of cleaning agent solution on the floor covering to the level of dirt
*Select rotary brushes suitable for the dirt and floor covering
Polishing
*Polishing is carried out without using liquid
*The brush well must be as dry as possible before the pad is fitted
EACH TIME AFTER USAGE
Pull out the plug
–Pull the power cable out of the socket
–Disconnect the plug from the power cable
Remove the
Emptying the tank
Remove the tank, empty and rinse with water
Note:
Dispose of the cleaning agent solution in accordance with the relevant regulations.
Heed the instructions of the cleaning agent's manufacturer.
Switching off the cleaner
Release the pushing handles and tip forwards
Lift the appliance
Engage the safety device
Position the cleaner vertically
Note:
Do not leave the cleaner on the rotary brushes
Dismantle the rotary brushes
Note:
If the machine is not positioned vertically the rotary brushes must be dismantled
–Remove the tank
–Carefully lay the cleaner down
Press down and suspend the rotary brushes
Remove the rotary brushes from the gearing
