Karcher G2800XC, G2600XC manual Symptom

Symptom	Cause	Solution
NO DETERGENT.	Detergent suction tube not	Check connection
	properly
	connected to the machine
	Detergent is too thick	Dilute detergent, for best results use Kärcher
		detergent
	Filter on detergent suction	Run warm water through filter to remove
	tube is clogged	debris
	Damaged or clogged deter-	Remove obstruction or replace detergent
	gent suction tube	suction tube
	A high pressure nozzle is	Replace with black detergent nozzle
	attached
	Metering valve closed	Open metering valve
	Spray nozzle is obstructed	Blow out or remove debris with fine needle
GARDEN HOSE	Loose fittings	Tighten fittings
CONNECTION
	Missing/worn rubber	Insert new washer
LEAKS
	washer
SPRAY WAND	Spray wand not properly	Turn the swivel nut of the gun clockwise until
LEAKS	attached	connection is tight
	Broken o-ring or plastic	Call Customer Support
	insert
PUMP IS NOISY	Not enough gas or engine	Check that hoses and fittings are air tight.
	oil	Turn off machine and purge pump by
		squeezing trigger gun until a steady flow of
		water emerges through the nozzle
WATER LEAKS	Loose fittings	Tighten fittings
FROM PUMP (UP
	Water seals are damaged
TO 10 DROP PER		Call Customer Support
	or worn.
MINUTE IS PER-
	Thermal protection device	Thermal protection device will auto reset.
MISSIBLE)
		Do not run pump for more than 5 minutes
	is activated.
		without spraying
OIL DRIP	Oil seals are damaged or	Call Customer Support
	worn

If the symptom you are experiencing is not listed above, or if the provided solutions do not solve your issue, please visit our extensive online trouble- shooting database at:

www.karcherresidential.com/help.

14English