USING THE ACCESSORIES
Quick connect nozzles
40° spray angle = White nozzle
The
For moderate dirt accumulation over a large surface.
0° spray angle = Red nozzle
For particularly stubborn accumulation of grime. Not recommended for soft materials like sidings, decks, painted surfaces, cars.
15° spray angle = Yellow nozzle
For dirt accumulation over a surface.
25° spray angle = Green nozzle
For dirt accumulation over a large surface.
65° spray angle = Black nozzle
For operating with detergents or cleaning with low pressure.
WARNING
High pressure in nozzle area. Risk of injury caused by improperly locked nozzle.
■Make sure you hear the "click" when inserting the nozzle tip into the quick connection.
■Pull the nozzle to make sure it is seated properly before operating your unit. (See ASSEMBLY NSTRUCTIONS: Step 6)
WARNING
To avoid serious injury never point spray noz- zle at yourself, other persons or animals.
WORKING WITH DETERGENTS
Detergents can only be applied with the black
detergent nozzle.
STEP 1:
Install the black detergent nozzle for detergent application (will work at low pressure only).
STEP 2:
Fill the detergent tank with Kärcher detergent. Close the detergent tank with the detergent
mattering cap.
STEP 3:
Adjust the detergent metering valve to the desired dosage.
STEP 4:
With the engine running, pull trigger to operate unit. Liquid detergent is drawn into the unit and mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on surface.
STEP 5:
Always draw fresh water through the deter- gent suction tube when the cleaning job is done, to rinse/flush any remaining detergents from the injection system.
For best results see Cleaning Tips for spe-
cific information on how to clean different surfaces.
English 9