ASSEMBLY INSTRUCTIONS
ÎSTEP 1:
Attach the handle to the frame of the pressure washer. Align holes, insert bolts, and tighten with knobs.
ÎSTEP 2:
Fasten the rubber grommets in the nozzle holder.
ÎSTEP 3:
Mount the nozzle holder and the gun/hose storage handle.
ÎSTEP 5:
Attach the wand to the spray gun.
ÎSTEP 6:
Pull the
ÎSTEP 7:
Release the collar and push the noz- zle until the collar clicks.
Î STEP 4: | WARNING |
Place the quick connect nozzles in | High pressure in nozzle area. | |
the nozzle holder. | ||
Risk of injury caused by improperly | ||
| ||
| locked nozzle. | |
| Make sure you hear a ‘click’ when in- | |
| serting the nozzle tip into the wand. | |
| Pull the nozzle to make sure it is | |
| seated properly before operating | |
| your unit. |
6English
