TROUBLESHOOTING – continued
| WARRANTY USA / CDN | |
• Loose fittings. |
|
|
| See enclosed warranty card. | |
- Tighten fittings. |
| |
|
| |
• Missing/worn rubber washer. |
|
|
- Insert new washer. |
|
|
|
|
|
|
|
•Spray wand not properly attached.
-Attach the wand to the spray gun. Turn the wand collar clockwise onto the gun threads until tight.
•Broken
-Call Kärcher customer service hotline and order an
•Pump is sucking air.
-Check that hoses and fittings are air tight. Turn off machine and purge pump by squeezing trigger gun until a steady flow of water emerges through the nozzle.
•Loose fittings.
-Check that all fittings are tight.
•Water seals are damaged or worn.
-Call Customer service.
•Thermal protection device is acti- vated.
-Thermal protection device will auto reset. Do not run pump for more than 5 minutes without spraying.
•Oil seals are damaged or worn. Call customer service.
Kärcher Customer Support USA
Kärcher Customer Service CDN
13
