TROUBLESHOOTING – continued
•Loose fittings.
-Tighten fittings.
•Missing/worn rubber washer.
-Insert new washer.
&210
•Spray wand not properly attached.
-Attach the wand to the spray gun. Turn the wand collar clockwise onto the gun threads until tight.
•Broken
-Call Kärcher customer service hotline and order an
2
•Pump is sucking air.
-Check that hoses and fittings are air tight. Turn off machine and purgepump by squeezing trigger gun until a steady flow of water emerges through the nozzle.
,0?
•Loose fittings.
-Check that all fittings are tight.
•Water seals are damaged or worn.
-Call service center.
•Thermal protection device is activated.
-Thermal protection device will auto reset.
!0
•Oil seals are damaged or worn. Call service center.
!
WARRANTY USA
"6
WARRANTY CDN
OP06:
3
3 3
2 3
60
;
;OP06
*+
6
3; ; 3
;>
3;3
3.6
;;
6 13 5
. 3
336
0G3
3
6
Kärcher Customer Support USA
Kärcher Customer Service CDN
!