TROUBLESHOOTING
Disconnectthe machine from the power source before making any repair.
| Cause | Solution |
|
|
|
| On/Off switch is in the “OFF” | Turn switch to the “ON” |
| position. | position. |
|
|
|
| Power cord is not plugged in. | Plug in power cord. |
|
|
|
| Extension cord is too long. | Replace extension cord with |
| Extension cord is not proper gauge. | either a 25 ft. 12/2 gauge cord |
| Extension cord is damaged. | or a 50 ft. 10/2 gauge cord. |
|
|
|
| Electrical outlet does not supply | Try a different outlet. |
| adequate power. |
|
|
|
|
Diameter of garden hose is too | Replace with a 1/2 inch or 5/8 | |
small. | inch garden hose. | |
|
| |
Water supply is restricted. | Check garden hose for kinks, | |
| leaks and blockage. | |
|
| |
Not enough inlet water supply. | Open water source full force. | |
|
| |
Water inlet filter is clogged. | Remove filter and rinse out in | |
| warm water. | |
|
| |
Triple nozzle is in low pressure | Turn triple nozzle to high pressure | |
position. | position. | |
|
| |
Not enough inlet water supply. | Turn water on full force. Check | |
| garden hose for kinks, leaks or | |
|
| blockage. |
|
|
|
| Pump is sucking air. | Check that hoses and fittings are |
|
| air tight. Turn off machine and |
|
| purge pump by squeezing trigger |
|
| gun until a steady flow of water |
|
| emerges through the nozzle. |
|
|
|
| Water inlet filter is clogged. | Remove filter and rinse out in |
|
| warm water. |
|
|
|
| Discharge nozzle is obstructed. | Blow out or remove debris with a |
|
| fine needle. |
|
|
|
| Calcified gun, hose or power | Run distilled vinegar through |
| nozzle. | detergent tank. |
|
|
|
10
